猴痘病毒抗體快篩 |Monkeypox Virus (MPV) Rapid Test ATTOGENE貨號AU2031

| 代理廠牌: | ![]() |
| 原廠連結: | |
| 相關下載: |
猴痘病毒抗體快篩 |Monkeypox Virus (MPV) Rapid Test ATTOGENE貨號AU2031
For rapid, sensitive and accurate screening of potential Tyrosinase inhibitors
This product is intended for the qualitative detection of Monkeypox Virus antibodies (IgM and IgG). It provides an aid in the determination of Monkeypox Virus exposure. A rapid test for the qualitative detection of Monkeypox Virus (MPV) IgG/IgM in human serum, plasma, or whole blood. For professional medical institutions use only, not for self-testing.

本產品用於定性檢測猴痘病毒抗體(IgM 和 IgG)。它有助於確定猴痘病毒暴露情況。定性快速測試檢測人血清、血漿或全血中的猴痘病毒 (MPV) IgG/IgM。此產品為研究等級,非IVD認證。
產品介紹
猴痘病毒(Monkeypox virus, MPV)是一種罕見的病毒性傳染病(viral infectious disease),類似於由猴痘病毒(monkeypox virus)引起的人類天花( human smallpox),也是一種人畜共患疾病(animal-to-human transmission)主要分佈於熱帶雨林中非和西非(western Africa)。主要傳播途徑是動物到人的傳播。人們感染了被受感染的動物咬傷或直接接觸而得病接觸受感染動物的血液和體液。猴痘病毒(Monkeypox virus )是一種致死率很高的病毒,所以早期篩查測試對於控制(Monkeypox virus )的傳播非常重要。該套件中的測試條包括兩條測試線(M 和 G)和一條控制線。 M線有塗層抗人IgM抗體,G線包被抗人IgG抗體。樣品被加載到卡帶上的樣品加載孔中,樣品在條帶下移動毛細管效應。如果測試樣本中存在 MPV IgM 抗體,它會與 MPV 結合偶聯形成免疫複合物(immune complex)。該複合物將被塗在 M 上的抗體檢測到線並可視化為紫紅色帶。同樣,如果測試樣本中存在 MPV IgG 抗體,它將在 G 線上顯示為紫紅色帶。如果 M 線和 G 線均未出現,則抗體檢測結果為陰性。作為產品質量控制,C線應始終出現在控制區域表明已添加適當體積的樣本並且膜芯吸效果發生了。

TAGS: lateral-flow, Monkeypox virus, MPV, Test kit
Allow the test device and specimens to restore to room temperature (15°C-30°C or 59°F-80°F) prior to testing.
1. Take out a test card from an aluminum foil pouch.
2. Disinfect the patient’s fingertip with a piece of 70% alcohol wipe.
3. Open the blood sampling needle. Press the needle firmly on the fingertip until you hear a click sound. Discard the needle properly.
4. Hold the dropper vertically, transfer 1 drop of sample (about 30-35μL) into the antibody loading hole on the test card.
5. Add 3 drops of buffer into the antibody loading hole immediately. 6. Read the result in 15 minutes. The result is considered inaccurate and invalid after 20 minutes.


Attogene 台灣代理/Attogene 台灣經銷
10nm Colloidal Gold、30nm Colloidal Gold、 40nm Colloidal Gold 、
Attogene 提供側流分析開發(Lateral Flow Assay)奈米金粒子( Colloidal Gold)

用於橫向流動(Lateral Flow Assay)的膠體金( Colloidal Gold)是一種高度穩定且均勻的金納米粒子(gold nanoparticles),膠體金( Colloidal Gold)用於抗體的傳統被動結合, 無塗層金納米粒子於Passive conjugation被動共軛進行了優化,可應用於 lateral flow tests側向流動測試。提供形狀尺寸分佈最平均之奈米金粒子。適用於:蛋白質吸附、寡核苷酸吸附、表面修飾。Attogene奈米金溶液特點: 形狀最一致、尺寸分佈最平均10nm ± 1.5nm,均勻的形狀確保抗體的一致結合,確保可靠的分析結果。高抗體結合率以達最佳靈敏度。每批10nm膠體金: 平均直徑:8.5-11.5nm

可提供 1 OD 至 100 OD 的範圍(粒子濃度2.5- 8.6 x 1012/mL)。偶聯物( conjugate )的質量和性能對於成功的橫向流動測試生產(lateral flow test manufacturing)至關重要。ATTOGENE產品在美國製造,並在最先進的製造設施中生產,可實現快速周轉時間,同時確保批次間的一致性和可靠性。建議的儲存和處理程序:儲存在 2 – 25oC. 不要凍結。冷凍會導致不可逆的聚集顆粒並破壞產品。置於室溫並劇烈搖晃 30 秒以確保顆粒充分每次使用前分散使用。每ml的奈米金粒子2.5- 8.6 x 1012/mL。膠體金濃度 (mg/mL)為5.7- 6.0 x 10-2。Molar Concentration (moles/liter)0.4-1.4 x 10-8

Specifications 1OD 40nm Gold (1L)
| Number of particles/mL | 5.2-7.2 x 1010 |
| Gold Concentration (mg/mL) | 3.7-4.2 x 10-2 |
| Molar Concentration (moles/liter) | 8-12 x 10-11 |
| Particle Diameter | 40 nm /- 1.5 |
Related products:
AU2012-01: 10nm Colloidal Gold (1O.D, 1L) >>操作手冊
AU2013-01: 30nm Colloidal Gold (1O.D, 1L) >>操作手冊
AU2014-01: 40nm Colloidal Gold (1O.D, 1L) >>操作手冊
AU2015-01: 60nm Colloidal Gold (1O.D, 1L) >>操作手冊

40nm奈米金溶液特點: (1O.D/1公升, 貨號AU2014-01)
形狀最一致、尺寸分佈最平均40nm ± 2.5nm,均勻的形狀確保抗體的一致結合,確保可靠的分析結果。高抗體結合率以達最佳靈敏度。每批40nm膠體金(1 O.D): 平均直徑:37.5-42.5nm

40 nm奈米金顆粒(1O.D/1公升, 貨號AU2014-01)的紫外-可見光譜

10nm奈米金溶液特點: (1O.D/1公升, AU2012-01)
形狀最一致、尺寸分佈最平均10nm ± 1.5nm,均勻的形狀確保抗體的一致結合,確保可靠的分析結果。高抗體結合率以達最佳靈敏度。每批10nm膠體金(1 O.D): 平均直徑:8.5-11.5nm、

10 nm奈米金顆粒 (1O.D/1公升, AU2012-01)的紫外-可見光譜

30nm奈米金溶液特點: (1O.D/1公升, 貨號AU2013-01)
形狀最一致、尺寸分佈最平均30nm ± 1.5nm,均勻的形狀確保抗體的一致結合,確保可靠的分析結果。高抗體結合率以達最佳靈敏度。每批30nm膠體金(1 O.D): 平均直徑:28.5-31.5nm
Specifications 1OD 30nm Gold (1L)
| • Number of particles/mL | 1.3-2 x 1011 |
| • Gold Concentration (mg/mL) | 4.2-4.7 x 10-2 |
| • Molar Concentration (moles/liter) | 2.2-3.3 x 10-10 |
| • Particle Diameter | 30 nm /-1.5 |

30 nm奈米金顆粒 (1O.D/1公升, AU2013-01)的紫外-可見光譜

60nm奈米金溶液特點: (1O.D/1公升, 貨號AU2015-01)
形狀最一致、尺寸分佈最平均60nm ± 4.5nm,均勻的形狀確保抗體的一致結合,確保可靠的分析結果。高抗體結合率以達最佳靈敏度。每批60nm膠體金(1 O.D): 平均直徑:65.5-64.5nm
Specifications 1OD 60nm Gold (1L)
| Number of particles/mL | 1.5-2 x 1010 |
| Gold Concentration (mg/mL) | 3.6-4.1 x 10-2 |
| Molar Concentration (moles/liter) | 2.5-3.4 x 10-11 |
| Particle Diameter | 40 nm /- 1.5 |

60 nm奈米金顆粒 (1O.D/1公升, AU2015-01)的紫外-可見光譜

ATTOGENE提供 1 OD 至 100 OD 的範圍(以40nm奈米金粒子為例,粒子濃度2.5- 8.6 x 1012/mL)。偶聯物( conjugate )的質量和性能對於成功的橫向流動測試生產(lateral flow test manufacturing)至關重要。
建議的儲存和處理程序:
儲存在 2 – 25oC. 不要凍結。冷凍會導致不可逆的聚集顆粒並破壞產品。置於室溫並劇烈搖晃 30 秒以確保顆粒充分每次使用前分散使用。以40nm奈米金粒子為例,每ml的奈米金粒子2.5- 8.6 x 1012/mL。膠體金濃度 (mg/mL)為5.7- 6.0 x 10-2。Molar Concentration (moles/liter)0.4-1.4 x 10-8

奈米金(又稱為膠體金),常以溶液型態呈現。當奈米金粒子越小(<100nm)則呈現紅色溶液。反之(>100nm)則越偏向藍紫色。奈米金粒子用途廣泛,可應用於橫向流分析、顯微影像、流式細胞、萊曼光譜、以及動態光散射(DLS)。在這些應用中,奈米金粒子的大小是非常重要的影響關鍵。雖然奈米金的來源多種(自製or商品化產品),ATTOGENE產品在美國製造,並在最先進的製造設施中生產,可實現快速周轉時間,同時確保批次間的一致性和可靠性。
Colloidal gold applications
| Application |
Size |
Shape | |||
| 10 | 20 | 40 | 80 | ||
| Lateral Flow | ● | ● | ● | Sphere | |
| Western Blots | ● | ● | ● | Sphere | |
| Dot Blots | ● | Sphere | |||
| Dark Field microscopy | ● | Sphere | |||
| DLS | ● | ● | ● | ● | Sphere |
| Flow Cytometry | ● | ● | Sphere | ||
| Electron microscopy | ● | ● | Sphere | ||
| Metal enhanced fluorescence | ● | Sphere/flat surface | |||
| SERS | ● | ● | Not spherical | ||
| FRET quench | ● | ● | ● | Sphere | |
| Infrared phototermal therapy | ● | ● | Rod/hollow sphere | ||
| Radiofrequency ablation | ● | Sphere | |||
| Drug delivery | ● | ● | ● | Rod/sphere | |
